Polycom IP 320 Administrator's Manual page 253

Attribute
qos.ip.rtp.dscp
qos.ip.rtp.min_delay
qos.ip.rtp.max_throughput
qos.ip.rtp.max_reliability
qos.ip.rtp.min_cost
qos.ip.rtp.precedence
qos.ip.rtp.video.dscp
qos.ip.rtp.video.min_delay
qos.ip.rtp.video.max_throughput
RTP <rtp/>
These parameters apply to RTP packets.
Permitted
Values
0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
AF22,AF23,
AF31,AF32,
AF33,AF41,
AF42,AF43
0 or 1
0 or 1
0 or 1
0 or 1
0-7
0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
AF22,AF23,
AF31,AF32,
AF33,AF41,
AF42,AF43
0 or 1
0 or 1
Default Interpretation
Null This parameter allows the DSCP of
packets to be specified. If set to a
value, this will override the other
qos.ip.rtp... parameters. Default
of Null which means the other
qos.ip.rtp... parameters will be
used.
1 If set to 1, set min-delay bit in the IP
TOS field of the IP header, or else
don't set it.
1 If set to 1, set max-throughput bit in
the IP TOS field of the IP header, or
else don't set it.
0 If set to 1, set max-reliability bit in
the IP TOS field of the IP header, or
else don't set it.
0 If set to 1, set min-cost bit in the IP
TOS field of the IP header, or else
don't set it.
5 If set to 1, set precedence bits in the
IP TOS field of the IP header, or
else don't set them.
Null This parameter allows the DSCP of
packets to be specified. If set to a
value, this will override the other
qos.ip.rtp.video... parameters.
Default of Null which means the
other qos.ip.rtp.video...
parameters will be used.
1 If set to 1, set min-delay bit in the IP
TOS field of the IP header, or else
don't set it.
1 If set to 1, set max-throughput bit in
the IP TOS field of the IP header, or
else don't set it.
Configuration Files
A - 73