Polycom IP 320 Administrator's Manual page 219

Attribute
se.stutterOnVoiceMail
se.appLocalEnabled
Instruction Meaning
sampled (n) Play sampled audio file
n
chord (n, d) Play chord set n (d is
optional and allows the
chord set ON duration to
be overridden to d
milliseconds)
silence (d) Play silence for d
milliseconds (Rx audio
is not muted)
branch (n) Advance n instructions
and execute that
instruction (n must be
negative and must not
branch beyond the first
instruction)
This configuration attribute is defined as follows:
Permitted
Values Default
0 or 1 1
0 or 1 1
This attribute also includes:
• Patterns <pat/>
• Ring type <rt/>
Patterns <pat/>
Patterns use a simple script language that allows different chord sets or wave
files to be strung together with periods of silence. The script language uses the
following instructions:
Example
se.pat.callProg.x.inst.y.type ="sampled" (sampled audio
file instruction type)
se.pat.callProg.x.inst.y.value ="3" (specifies sampled
audio file 3)
se.pat.callProg.x.inst.y.type = "chord" (chord set
instruction type)
se.pat.callProg.x.inst.y.value = "3" (specifies call
progress chord set 3)
se.pat.callProg.x.inst.y.param = "2000" (override ON
duration of chord set to 2000 milliseconds)
se.pat.callProg.x.inst.y.type = "silence" (silence
instruction type)
se.pat.callProg.x.inst.y.value = "300" (specifies silence is
to last 300 milliseconds)
se.pat.callProg.x.inst.y.type = "branch" (branch
instruction type)
se.pat.callProg.x.inst.y.value = "-5" (step back 5
instructions and execute that instruction)
Interpretation
If set to 1, stuttered dial tone is used in place of
normal dial tone to indicate that one or more
messages (voice mail) are waiting at the message
center.
If set to 1, local user interface sound effects such
as confirmation/error tones, will be enabled.
Configuration Files
A - 39