Polycom IP 320 Administrator's Manual page 54

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
3 - 18
Edit contents of phone[MACaddress].cfg if desired.
c
For example, edit the parameters.
2. Create new configuration file(s) in the style of sip.cfg by performing the
following steps:
Create application sipXXXX.cfg file by using the sip.cfg file from the
a
distribution as templates.
For more information on the sip.cfg file, refer to
Configuration
Edit contents of sipXXXX.cfg if desired.
b
For example, edit the parameters.
Most of the default settings are typically adequate, however, if SNTP
settings are not available through DHCP, the SNTP GMT offset and
(possibly) the SNTP server address will need to be edited for the
correct local conditions. Changing the default daylight savings
parameters will likely be necessary outside of North American
locations. (Optional) Disable the local web (HTTP) server or change its
signaling port if local security policy dictates (refer to
<httpd/> on page A-79). Change the default location settings for user
interface language and time and date format (refer to
<lcl/> on page A-27).
3. Create a master configuration file by performing the following steps:
Create per-phone or per-platform <MACaddress>.cfg files by using
a
the 00000000000.cfg and files from the distribution as templates.
For more information, refer to
A-2.
Edit the CONFIG_FILES attribute of the <MACaddress>.cfg files so
b
that it references the appropriate phone[MACaddress].cfg file.
For example, replace the reference to phone1.cfg with
phone[MACaddress].cfg.
Edit the CONFIG_FILES attribute of the <MACaddress>.cfg files so
c
that it references the appropriate sipXXXX.cfg file.
For example, replace the reference to sip.cfg with sip650.cfg.
Edit the LOG_FILE_DIRECTORY attribute of the <MACaddress>.cfg
d
files so that it points to the log file directory.
Edit the CONTACT_DIRECTORY attribute of the
e
<MACaddress>.cfg files so that it points to the organization's contact
directory.
on page A-5.
Master Configuration Files
Application
Web Server
Localization
on page