Quick Setup Of Soundpoint Ip / Soundstation Ip / Vvx Phones - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Central Configuration file:
sip.cfg
(boot server)

Quick Setup of SoundPoint IP / SoundStation IP / VVX Phones

4 - 76
These messages are displayed in any language supported by the phone for
three seconds unless overridden by another message or action.
For example, if a user parks a call, the following message appears on their
phone:
Configuration changes can be performed centrally at the boot server:
Turn this feature on or off and specify which warnings are
displayable.
• For more information, refer to
In the SIP 3.1.2 release, a Quick Setup feature was added to simplify the
process of entering the provisioning (boot) server parameters from the phone's
user interface. This feature is designed to make it easier for on-site, "out of the
box" provisioning of SoundPoint IP, SoundStation IP, and VVX phones.
When enabled, this feature will present a QSetup soft key to the user. When
the user presses the QSetup soft key, a new menu will immediately appear
that allows them to configure the necessary parameters for the phone to access
the provisioning server for configuration. The QSetup soft key may be
disabled using a configuration file setting such that it does not appear after it
has been successfully configured.
The Quick Setup feature is supported on all SoundPoint IP 32x/33x, 430, 450,
550, 560, 650, and 670 desktop phones, SoundStation IP 6000 and 7000
conference phones, and Polycom VVX 1500 phones.
System administrators can enable the Quick Setup feature through the use of
a new parameter in sip.cfg configuration file (or through the phone's menu).
For details on how to configure SoundPoint IP, SoundStation IP, and VVX
phones for quick setup, refer to "Technical Bulletin 45460: Using Quick Setup
with SoundPoint IP, SoundStation IP, and Polycom VVX 1500 Phones" at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html .
SIP <SIP/> on page A-11.