Upgrading Sip Application; Supporting Soundpoint Ip, Soundstation Ip, And Polycom Vvx; Phones - Polycom IP 320 Administrator's Manual

Upgrading SIP Application

• If the secondary is not configured for DHCP, use the secondary's static
provisioning server if it exists.
• If the secondary's static provisioning server does not exists, use the
primary's provisioning server (ignoring the source).
For more information on daisy-chaining and setting up the SoundStation IP
7000 conference phone, refer to the Setup Guide for the Polycom SoundStation IP
7000 Phone, which is available at
http://www.polycom.com/voicedocumentation/.
You can upgrade the SIP application that is running on the SoundPoint IP,
SoundStation IP, and VVX phones in your organization. The exact steps that
you perform are dependent on the version of the SIP application that is
currently running on the phones and the version that you want to upgrade to.
The BootROM, application executable, and configuration files can be updated
automatically through the centralized provisioning model. These files are
read-only by default.
Most organization can use the instructions shown in the next section,

Supporting SoundPoint IP, SoundStation IP, and Polycom VVX

However, if your organization has a mixture of SoundPoint IP 300, 301, 500,
501, 600, 601 and/or SoundStation IP 4000 phones deployed along with other
models, you will need to change the phone configuration files to continue to
support the SoundPoint IP 300, 301, 500, 501, 600, and 601 and SoundStation
IP 4000 phones when software releases SIP 3.2.0 or later are deployed. These
models were discontinued as follows:
• The SoundPoint IP 300 and 500 phones as of May 2006.
• The SoundPoint IP 301, 600, and 601 phones as March 2008.
• The SoundPoint IP 501 phone as of August 2009.
• The SoundStation IP 4000 phone as of May 2009.
In all cases, refer to Supporting SoundPoint IP 300, 301, 500, 501, 600 and 601
and SoundStation IP 4000 Phones on page 3-23.
Setting up Your System

Phones.

3 - 21