Handset, Headset, And Speakerphone - Polycom IP 320 Administrator's Manual

Polycom soundpoint ip/soundstation ip/ vvx family
Hide thumbs Also See for IP 320:
Table of Contents

Advertisement

Central
Configuration file:
sip.cfg
(provisioning
server)
Configuration file:
phone1.cfg
Local
Local Phone User
Interface

Handset, Headset, and Speakerphone

Server-based DND will behave the same as per-SIP 2.1 per-registration feature
with the following exceptions:
Server based DND cannot be used if the phone is configured as a shared
line.
If server-based DND is enabled, but inactive, and the user presses the
DND key or selects the DND option on the Feature menu, the "Do Not
Disturb" message does not appear on the user's phone (incoming call
alerting will continue).
Configuration changes can be performed centrally at the provisioning server
or locally:
Enable or disable server-based DND.
For more information, refer to
Enable or disable local DND behavior when server-based enabled.
For more information, refer to
Specify whether or not DND results in incoming calls being given
busy treatment.
For more information, refer to
on page A-80.
Enable or disable server-based DND as a per-registration feature.
For more information, refer to
Specify whether DND is treated as a per-registration feature or a
global feature on the phone.
For more information, refer to
A-144.
Enable or disable DND using the Do Not Disturb key on the
SoundPoint IP 550, 560, 650, and 670 and the Polycom VVX 1500 or
the "Do Not Disturb" option on the Features menu on the SoundPoint
IP 32x/33x, 430, and 450 and SoundStation IP 5000, 6000 and 7000.
Note: The LED on the Do Not Disturb key on the Polycom VVX
1500 is red when pressed or when server-based DND is enabled.
SoundPoint IP phones come standard with a handset and a dedicated
connector is provided for a headset (not supplied). All Polycom phones are
full-duplex speakerphones. The SoundPoint IP phones provide dedicated
keys for convenient selection of either the speakerphone or headset.
All Polycom desktop phones can be configured to use the electronic
hookswitch. For more information, refer to "Technical Bulletin 35150: Using an
Electronic Hookswitch with SoundPoint IP and Polycom VVX 1500 Phones"at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html
.
Configuring Your System
SIP <SIP/>
on page
A-11
SIP <SIP/>
on page A-11.
Call Handling Configuration <call/>
Registration
<reg/>on page A-134.
Do Not Disturb <dnd/>
on page
4 - 9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP 320 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents