Polycom IP 320 Administrator's Manual page 315

Attribute
reg.x.type
reg.x.thirdPartyName
reg.x.auth.userId
reg.x.auth.password
reg.x.acd-login-logout
reg.x.acd-agent-available
reg.x.ringType
reg.x.lineKeys
Permitted
Values Default
private OR shared private
string in the same Null
format as
reg.x.address
string Null
string Null
0 or 1 0
0 or 1 0
1 to 22 2
1 to max 1
Interpretation
If set to private, use standard call signaling.
If set to shared, augment call signaling with
call state subscriptions and notifications and
use access control for outgoing calls.
This field must match the reg.x.address
value of the other registration which makes
up the bridged line appearance (BLA). It must
be Null in all other cases.
User ID to be used for authentication
challenges for this registration. If non-Null,
will override the "Reg User x" parameter
entered into the Authentication submenu off
of the Settings menu on the phone.
Password to be used for authentication
challenges for this registration. If non-Null,
will override the "Reg Password x" parameter
entered into the Authentication submenu off
of the Settings menu on the phone.
If both parameters are set to 1 for a
registration, the ACD feature will be enabled
for that registration.
The ringer to be used for calls received by
this registration. Default is the first non-silent
ringer.
max = the number of line keys on the phone.
max = 1 on IP 6000, 7000,
max = 2 on IP 32x/33x, 430,
max = 3 on IP 450,
max = 4 on IP 550, 560,
max = 6 on VVX 1500,
max = 34 on IP 650, 670 (without any
Expansion Modules attached, only 6 line keys
are available)
The number of line keys on the phone to be
associated with registration 'x'.
Configuration Files
A - 135