Sampled Audio For Sound Effects <Saf - Polycom IP 320 Administrator's Manual

Attribute
tone.chord.cat.x.freq.y
tone.chord.cat.x.level.y
tone.chord.cat.x.onDur
tone.chord.cat.x.offDur
tone.chord.cat.x.repeat
Sampled Audio for Sound Effects <saf/>
Note
In the following table, x is the chord-set number and cat is one of callProg,
ringer, or misc.
Permitted
Values
0-1600
-57 to 3
positive
integer
positive
integer
positive
integer
The following sampled audio WAVE file (.wav) formats are supported:
mono 8 kHz G.711 μ-Law
•
• G.711 A-Law
• L16/16000 (16-bit, 16 kHz sampling rate, mono)
• L16/32000 (16-bit, 32 kHz sampling rate, mono)
• L16/48000 (16-bit, 48 kHz sampling rate, mono)
L16/32000 and L16/48000 are supported on SoundStation IP 6000 and 7000
phones.
The phone uses built-in wave files for some sound effects. The built-in wave
files can be replaced with files downloaded from the provisioning server or
from the Internet, however, these are stored in volatile memory so the files will
need to remain accessible should the phone need to be rebooted. Files will be
truncated to a maximum size of 300 kilobytes.
Interpretation
Frequency for this component in Hertz; up to four
chord-set components can be specified (y=1, 2, 3, 4).
Level of this component in dBm0.
On duration in milliseconds, 0=infinite.
Off duration in milliseconds, 0=infinite.
Specifies how many times the ON/OFF cadence is
repeated, 0=infinite.
Configuration Files
A - 37