Polycom IP 320 Administrator's Manual page 311

Attribute
softkey.feature.callers
softkey.feature.mystatus
softkey.feature.buddies
softkey.feature.
basicCallManagement.redundant
Permitted
Values Default
0 Null
1
Null (default)
0 or 1 1
0 or 1 1
0 or 1 1
Interpretation
If set to Null, the Callers soft key is
displayed on the SoundPoint IP 32x/33x
phone, but not on any other phone.
If set to 0, the Callers soft key is not
displayed on any phone.
If set to 1, the Callers soft key is displayed
on all phones as follows:
• In the idle state, it is displayed after the
New Call soft key and before the Dir
soft key.
• In the dialtone state, it is displayed after
the End Call soft key and before the
Dir soft key.
• During a conference or transfer, it is
displayed before the Cancel soft key.
If set to 0, the MyStatus soft key is not
displayed.
If set to 1 or Null, the MyStatus soft key is
displayed.
Note: pres.idleSoftKeys must be set to
1 for this soft key to be displayed.
If set to 0, the Buddies soft key is not
displayed.
If set to 1 or Null, the Buddies soft key is
displayed.
Note: pres.idleSoftKeys must be set to
1 for this soft key to be displayed.
If set to 0 and the phone has hard keys
mapped for Hold, Transfer, and
Conference functions (all must be
mapped), all of these soft keys are not
displayed.
If set to 1 or Null, all of these soft keys are
displayed.
Configuration Files
A - 131