Polycom IP 320 Administrator's Manual page 105

Name
$C<command>$
$T<type>$
$M<macro>$
$P<prompt num>N<num
digits>$
$S<speed dial index>$
$F<internal function>$
URL
Prompt Macro Substitution
The action.string in the efklist element can be defined by a macro
substitution string, "PnNn" where:
• Pn is the prompt x as defined in the
• Nn is the number of digits or letters that the user can enter. The maximum
number is 32. The user needs to press the Enter soft key to complete data
entry.
Interpretation
This is the command. It can appear anywhere in the
action string.
Supported commands (or shortcuts) include:
• hangup (hu)
• hold (h)
• waitconnect (wc)
• pause <number of seconds> (p <num sec>) where
the maximum value is 10
The embedded action type. Multiple actions can be
defined.
Supported action types include:
• invite
• dtmf
• refer
Note: Polycom recommends that you always define this
field. If it is not defined, the supplied digits will be dialed
using INVITE (if no active call) or DTMF (if an active
call). The use of refer method is call server dependent
and may require the addition of star codes.
The embedded macro. The <macro> string must begin
with a letter.
If the macro name is not defined, the execution of the
action string fails.
The user input prompt string.
Refer to Prompt Macro Substitution
The speed dial index. Only digits are valid.
The action is found in the contact field of the local
directory entry pointed to by the index.
An internal function.
For more information, refer to
page C-19.
A URL. Only one per action string is supported.
efk.efkprompt.x
Configuring Your System
on this page.
Internal Key Functions on
4 - 43