Polycom IP 320 Administrator's Manual page 184

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Warning
A - 4
• LICENSE_DIRECTORY—An alternative directory to use for license files if
required. A URL can also be specified. This is blank by default.
The order of the configuration files listed in CONFIG_FILES is significant:
• The files are processed in the order listed (left to right).
• The same parameters may be included in more than one file.
• The parameter found first in the list of files will be the one that is effective.
This provides a convenient means of overriding the behavior of one or more phones
without changing the baseline configuration files for an entire system.
For more information, refer to the "Configuration File Management on SoundPoint
IP, SoundStation IP, and Polycom VVX 1500 Phones" white paper at
http://www.polycom.com/global/documents/support/technical/products/voice/white_
paper_configuration_file_management_on_soundpoint_ip_phones.pdf
If you have a requirement for different application loads on different phones
on the same provisioning server, you can create a variable in the master
configuration file that is replaced by the MAC address of each phone when it
reboots. An example is shown below:
<?xml version="1.0" standalone="yes"?>
<!-- Default Master SIP Configuration File -->
<!-- For information on configuring Polycom VoIP phones please
refer to the -->
<!-- Configuration File Management white paper available from: -->
<!--
http://www.polycom.com/common/documents/whitepapers/configuration_file
_management_on_soundpoint_ip_phones.pdf -->
<!-- $RCSfile: 000000000000.cfg,v $
< APPLICATION APP_FILE_PATH="sip[MACADDRESS].ld"
CONFIG_FILES="phone1[MACADDRESS].cfg, sip.cfg" MISC_FILES=""
LOG FILE DIRECTORY="" OVERRIDES_DIRECTORY="" CONTACTS_DIRECTORY=""
LICENSE_DIRECTORY=""/>
If you have a requirement for separate application loads on different phones
on the same provisioning server, you can modify the application that is loaded
when each phone reboots. An example is below:
<?xml version="1.0" standalone="yes"?>
<!-- Default Master SIP Configuration File -->
<!-- For information on configuring Polycom VoIP phones please
refer to the -->
<!-- Configuration File Management white paper available from: -->
<!--
http://www.polycom.com/common/documents/whitepapers/configuration_file
_management_on_soundpoint_ip_phones.pdf -->
<!-- $RCSfile: 000000000000.cfg,v $
< APPLICATION APP_FILE_PATH="[PHONE_PART_NUMBER].sip.ld"
CONFIG_FILES="phone1.cfg, sip.cfg" MISC_FILES="" LOG FILE DIRECTORY=""
OVERRIDES_DIRECTORY="" CONTACTS_DIRECTORY="" LICENSE_DIRECTORY=""/>
.
$Revision: 1.21 $ -->
$Revision: 1.21 $ -->