Polycom IP 320 Administrator's Manual page 300

Polycom soundpoint ip/soundstation ip/ vvx family
Hide thumbs Also See for IP 320:
Table of Contents

Advertisement

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
mb.ssawc.enabled
mb.ssawc.call.mode
Attribute
mb.idleDisplay.home
mb.idleDisplay.refresh
A - 120
Permitted Values
0 or 1
Active, Passive
This attribute also includes:
Idle Display <idleDisplay/>
Main Browser <main/>
Browser Limits <limits/>
Idle Display <idleDisplay/>
The Microbrowser can be used to create a display that will be part of the
phone's idle display. These settings control the home page and the refresh rate.
Permitted Values
Null or any fully
formed valid HTTP
URL. Length up to
255 characters.
0 or an integer > 5
Default
Interpretation
Null
If set to 0 or Null, spontaneous display of web
content is disabled.
If set to 1, spontaneous display of web content is
enabled.
Null
Control the spontaneous display of web content.
If set to passive or Null, the web content is
displayed only when requested by the user.
If set to active, the web content is displayed
immediately.
Default
Interpretation
Null
URL used for Microbrowser idle display home
page. For example:
http://www.example.com/xhtml/frontpage.cgi?pa
ge=home. If empty, there will be no
Microbrowser idle display feature. Note that the
Microbrowser idle display will displace the idle
display indicator (refer to
ind.idleDisplay.enabled in
on page A-100).
Note: If ind.idleDisplay.enabled is enabled,
miscellaneous XML errors can occur on
SoundPoint IP 430, 550, 560, 650, and 670 and
SoundStation IP 6000 and 7000 phones.
0
The period in seconds between refreshes of the
idle display Microbrowser's content. If set to 0,
the idle display Microbrowser is not refreshed.
The minimum refresh period is 5 seconds
(values from 1 to 4 are ignored, and 5 is used).
Note: If an HTTP Refresh header is detected, it
will be respected, even if this parameter is set to
0. The refresh parameter will be respected only
in the event that a refresh fails. Once a refresh is
successful, the value in the HTTP refresh
header, if available, will be used.
Indicators <ind/>

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents