Changing The Key On The Phone; Adding A Background Logo - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family

Changing the Key on the Phone

Adding a Background Logo

Note
C - 6
For security purposes, it may be desirable to change the key on the phones and
the server from time to time.
To change a key:
1. Put the new key into a configuration file that is in the list of files
downloaded by the phone (specified in 000000000000.cfg or <Ethernet
address>.cfg).
Use the device.sec.configEncryption.key parameter to specify the
new key.
2. Manually reboot the phone so that it will download the new key. The
phone will automatically reboot a second time to use the new key.
At this point, the phone expects all encrypted configuration files on the
provisioning server to use the new key and it will continue to reboot until
this is the case. The files on the server must be updated to the new key or
they must be made available in unencrypted format. Updating to the new
key requires decrypting the file with the old key, then encrypting it with
the new key.
Note that configuration files, contact directory files and configuration
override files may all need to be updated if they were already encrypted.
In the case of configuration override files, they can be deleted from the
provisioning server so that the phone will replace them when it
successfully boots.
Background logos are not supported on the Polycom VVX 1500 phone.
This section provides instructions on how to add a background logo to all
SoundPoint IP phones in your organization. You must be running at least
BootROM 2.x.x and SIP 1.x.x. One bitmap file is required for each model.
Model Width
IP 32x/33x 102
IP 430 94
IP 450 256
IP 550/560/650 209
Height Color Depth
23 monochrome
23 monochrome
116 4-bit grayscale or
monochrome
109 4-bit grayscale or
monochrome