Basic Tcp/Ip <Tcp_Ip - Polycom IP 320 Administrator's Manual

Basic TCP/IP <TCP_IP/>
Attribute
tcpIpApp.netMon.enabled
tcpIpApp.netMon.period
Attribute
tcpIpApp.sntp.resyncPeriod
tcpIpApp.sntp.address
This attribute includes:
• Network Monitoring <netMon/>
• Time Synchronization <sntp/>
• Port <port/>
• Keep-Alive <keepalive/>
Network Monitoring <netMon/>
Polycom recommends that you do not change these values.
This configuration attribute is defined as follows:
Permitted
Values
0 or 1
1 to 86400
Time Synchronization <sntp/>
The following table describes the parameters used to set up time
synchronization and daylight savings time. The defaults shown will enable
daylight savings time (DST) for North America.
Daylight savings defaults:
• Do not use fixed day, use first or last day of week in the month.
• Start DST on the second Sunday in March at 2 am.
• Stop DST on the first Sunday in November at 2 am.
Permitted
Values
positive
integer
valid host
name or IP
address
Default
1
30
Default
86400 (24
hours)
clock
Configuration Files
Interpretation
Time in seconds between
Simple Network Time
Protocol (SNTP) re-syncs.
Address of the SNTP
server.
A - 75