Setting Up Security Features; Local User And Administrator Privilege Levels - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family

Setting Up Security Features

Local User and Administrator Privilege Levels

Central Configuration file:
sip.cfg
(provisioning
server)
Local Web Server
(if enabled)
Local Phone User
Interface
4 - 92
This section provides information for making configuration changes for the
following security-related features:
• Local User and Administrator Privilege Levels
• Custom Certificates
• Incoming Signaling Validation
• Secure Real-Time Transport Protocol
• Configuration File Encryption
• Digital Certificates
• Mutual TLS Authentication
Several local settings menus are protected with two privilege levels, user and
administrator, each with its own password. The phone will prompt for either
the user or administrator password before granting access to the various menu
options. When the user password is requested, the administrator password
will also work. The web server is protected by the administrator password
(refer to Configuring SoundPoint IP / SoundStation IP / VVX Phones Locally
on page 4-98).
Configuration changes can be performed centrally at the provisioning server
or locally:
Specify the minimum lengths for the user and administrator
passwords.
• For more information, refer to
<pwd/><length/>
None.
The user and administrator passwords can be changed under the
Settings menu or through configuration parameters (refer to
Parameter Configuration
ASCII characters 32-127 (0x20-0x7F) only.
Changes are saved to local flash but are not backed up to <Ethernet
address>-phone.cfg on the provisioning server for security reasons.
Password Lengths
on page A-109.
on page A-157). Passwords can consist of
Flash