Polycom IP 320 Administrator's Manual page 204

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
dialplan.applyToUserSend
dialplan.impossibleMatchHandling
dialplan.removeEndOfDial
dialplan.applyToTelUriDial
dialplan.applyToRemoteDialing
A - 24
Permitted
Values
0 or 1
0, 1 or 2
0 or 1
0 or 1
0 or 1
This attributes also includes:
• Digit Map <digitmap/>
• Routing <routing/>
Digit Map <digitmap/>
A digit map is defined either by a "string" or by a list of strings. Each string in
the list is an alternative numbering scheme, specified either as a set of digits or
timers, or as an expression over which the gateway will attempt to find a
shortest possible match.
Default Interpretation
1 This attribute covers the case when the user
presses the Send soft key to send the dialed
number.
Value interpretation is the same as for
dialplan.applyToCallListDial.
0 Affects digits entered while in dial mode. For
example, the digits are affected after a user
has picked up the handset, headset, or
pressed the dial key, and not when hot
dialing, contact dialing, or call list dialing.
If set to 0, the digits entered up to and
including the point where an impossible
match occurred are sent to the server
immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate digits and
dispatch call manually with the Send soft key.
1 If set to 1, strip trailing # digit from digits sent
out.
1 A flag to determine if the dial plan applies to
uses of the tel:// URI.
If set to 1 or Null, the dial plan applies.
If set to 0, the dial plan does not apply.
0 A flag to determine if the dial plan applies to
for calls made through the Polycom HDX or
SoundStructure systems.
If set to 1, the dial plan applies.
If set to 0 or Null, the dial plan does not apply.