Polycom IP 320 Administrator's Manual page 43

Name
DHCP Client
DHCP Menu
Phone IP Address
Subnet Mask
IP Gateway
Server Menu
SNTP Address
GMT Offset
DNS Server
DNS Alternate Server
DNS Domain
Ethernet
EM Power
Syslog
Main Menu
The following configuration parameters can be modified on the main setup
menu:
Possible Values
Enabled, Disabled
dotted-decimal IP address
dotted-decimal subnet
mask
dotted-decimal IP address
dotted-decimal IP address
OR
domain name string
-13 through +12
dotted-decimal IP address
dotted-decimal IP address
domain name string
Enabled, Disabled
Description
If enabled, DHCP will be used to obtain the parameters
discussed in DHCP or Manual TCP/IP Setup
3-2.
Refer to DHCP Menu on page 3-8.
Note: Disabled when DHCP client is disabled.
Phone's IP address.
Note: Disabled when DHCP client is enabled.
Phone's subnet mask.
Note: Disabled when DHCP client is enabled.
Phone's default router.
Refer to Server Menu on page 3-10.
Simple Network Time Protocol (SNTP) server from
which the phone will obtain the current time.
Offset of the local time zone from Greenwich Mean
Time (GMT) in half hour increments.
Primary server to which the phone directs Domain
Name System (DNS) queries.
Secondary server to which the phone directs Domain
Name System queries.
Phone's DNS domain.
Refer to Ethernet Menu on page 3-12.
This parameter is relevant if the phone gets Power over
Ethernet (PoE). If enabled, the phone will set power
requirements in CDP to 12W so that up to three
Expansion Modules (EM) can be powered. If disabled,
the phone will set power requirements in CDP to 5W
which means no Expansion Modules can be powered (it
will not work).
Refer to Syslog Menu on page 3-13.
Setting up Your System
on page
3 - 7