Polycom IP 320 Administrator's Manual page 333

Attribute
attendant.resourceList.x.type
Attribute
attendant.behaviors.display.
spontaneousCallAppearances.normal
attendant.behaviors.display.
spontaneousCallAppearances.automata
attendant.behaviors.display.
remoteCallerID.normal
attendant.behaviors.display.
remoteCallerID.automata
Permitted Values
"normal" or
"automata"
Behaviors <behaviors/>
This configuration attribute is defined as follows:
Permitted Values
0 or 1
0 or 1
0 or 1
0 or 1
Default Interpretation
"normal" Type of resource being monitored.
If set to normal, the default action when
pressing the line key adjacent to this
monitored user is to initiate a call if the
user is idle or busy and to perform a
directed call pickup if the user is ringing.
Any active calls are first placed on hold.
If set to automata, the default action when
pressing the line key adjacent to this
monitored user is to perform a park/blind
transfer of any currently active call. If there
is no active call and the monitored user is
ringing/busy, an attempt to perform a
directed call pickup/park retrieval is made.
Default Interpretation
1 A flag to determine whether or
not a call appearance is
spontaneously presented to the
0
attendant when calls are alerting
on a monitored resource. The
information displayed after a
press-and-hold of a resource's
line key is unchanged by this
parameter. If set to 1, the display
is enabled.
1 A flag to determine whether or
not remote party caller ID
information is presented to the
1
attendant. If set to 0 (disabled),
the string "unknown" would be
substituted for both name and
number information.
Configuration Files
A - 153