Polycom IP 320 Administrator's Manual page 262

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
call.stickyAutoLineSeize.
onHookDialing
call.singleKeyPressConference
call.localConferenceCallHold
call.transfer.blindPreferred
A - 82
Permitted
Values Default
Null, 0, or 1 Null
0,1 0
0 or 1 0
0,1 Null
Interpretation
If call.stickyAutoLineSeize is set to 1, this
parameter has no effect. The regular
stickyAutoLineSeize behavior is followed.
If call.stickyAutoLineSeize is set to 0 or Null
and this parameter is set to 1, this overrides the
stickyAutoLineSeize behavior for hot dial only.
(Any new call scenario seizes the next available
line.)
If call.stickyAutoLineSeize is set to 0 or Null
and this parameter is set to 0 or Null, there is no
difference between hot dial and new call
scenarios.
Note: A hot dial occurs on the line which is
currently in the call appearance. Any new call
scenario seizes the next available line.
If set to 1, the conference will be setup after a
user presses the Conference soft key or
Conference key the first time. Also, all sound
effects (dial tone, DTMF tone while dialing and
ringing back) are heard by all existing
participants in the conference.
If set to 0 or Null, sound effects are only heard by
conference initiator (old behavior).
Only supported for SoundPoint IP 550, 560,650
and 670 and SoundStation IP 7000. For all
others, set to 0.
If set to 0, a hold will happen for all legs when
conference is put on hold. (old behavior).
If set to 1, only the host is out of the conference,
all other parties in conference continue to talk.
(new behavior).
If set to Null, the default value is 0.
Only supported for the SoundPoint IP 550,
560,650 and 670 and the SoundStation IP 7000
(refer to Manage Conferences
For all others, set to 0.
If set to 1, the blind transfer is the default mode.
The Normal soft key is available to switch to a
consultative transfer.
If set to 0 or Null, the consultative transfer is the
default mode. The Blind soft key is available to
switch to a blind transfer.
Note: This parameter is supported on the
SoundPoint IP 32x/33x only.
on page 4-22).