Dns Cache <Dns - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
DNS Cache <dns/>
Attribute
dns.cache.NAPTR.x.
name
dns.cache.NAPTR.x.ttl
dns.cache.NAPTR.x.
order
dns.cache.NAPTR.x.
preference
dns.cache.NAPTR.x.
flags
dns.cache.NAPTR.x.
service
A - 126
In the tables below, a maximum of 12 entries of NAPTR, SRV, and A record
can be added.
This attribute includes:
• NAPTR <NAPTR/>
• SRV <SRV/>
• A <A/>
NAPTR <NAPTR/>
This configuration attribute is defined as follows:
Permitted Values
domain name string
300 to 65535
0 to 65535
0 to 65535
string
string
attribute
Default Interpretation
Null The domain name to which this resource record
refers.
300 Specifies the time interval (in seconds) that the
resource record may be cached before the
source of the information should again be
consulted.
0 A 16-bit unsigned integer specifying the order in
which the NAPTR records must be processed to
ensure the correct ordering of rules.
0 A 16-bit unsigned integer that specifies the order
in which NAPTR records with equal "order"
values should be processed, low numbers being
processed before high numbers.
Flags to control aspects of the rewriting and
interpretation of the fields in the record. Flags
are single characters from the set [A-Z, 0-9].
The alphabetic characters are case insensitive.
At this time only four flag, "S", "A", "U", and "P"
are defined. For more information, go to
http://tools.ietf.org/html/rfc2915
Specifies the service(s) available down this
rewrite path. For more information, go to
http://tools.ietf.org/html/rfc2915
.
.