Polycom IP 320 Administrator's Manual page 264

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
call.autoRouting.preference
call.autoRouting.
preferredProtocol
Attribute
call.shared.disableDivert
call.shared.seizeFailReorder
A - 84
Permitted
Values Default
"line" or "line
"protocol"
"SIP or SIP
"H323"
This attribute also includes:
• Shared Calls <shared/>
• Hold, Local Reminder <hold/><localReminder/>
Shared Calls <shared/>
This configuration attribute is defined as follows:
Permitted
Values Default
0 or 1 1
0 or 1 1
Interpretation
If set to line, calls are placed via the first
available line, regardless of its protocol
capabilities. If the first available line has both SIP
and H.323 capabilities, the preferred protocol will
be used preferentially
(call.autoRouting.preferredProtocol).
If set to protocol, the first available line with the
preferred protocol activated is used, if available,
and if not available, the first available line will be
used.
Note: Auto-routing is used when manual routing
selection features are disabled. Refer to
Preferences <up/> on page A-31.
Note: This parameter is supported on the
Polycom VVX 1500 only.
If set to SIP, calls are placed via SIP if available,
or via H.323 if SIP is not available.
If set to H323, calls are placed via H.323 if
available, or via SIP if H.323 is not available.
Note: This parameter is supported on the
Polycom VVX 1500 only.
Interpretation
If set to 1, disable diversion feature for shared
lines.
Note: This feature is disabled on most call
servers.
If set to 1, play re-order tone locally on shared
line seize failure.
User