Importing Hosts From A Fabric - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

2

Importing Hosts from a Fabric

7.
8. Click OK on the Add Host Discovery dialog box.
9. Click Close on the Discover Setup dialog box.
Importing Hosts from a Fabric
To discover a Host from a discovered fabric, complete the following steps.
1. Select Discover > Setup.
2. Click Add Host.
3. Enter a discovery request name (such as, MyFabric) in the Name field.
4. Select Hosts in Fabric from the list.
5. Select All fabrics or an individual fabric from the list.
6. Click Add.
7.
44
Configure Host credentials, if necessary.
To configure host credentials, refer to
"Configuring virtual machine credentials"
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Addresses table with pending status. To update the status
from pending you must close and reopen the Discover Setup dialog box.
The Discover Setup dialog box displays.
The Add Host Discovery dialog box displays.
FIGURE 25
Add Host Discovery dialog box - Host tab
All hosts which are part of a managed fabric and have a registered host name display in the
text box. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.
Configure Host credentials, if necessary.
To configure host credentials, refer to
"Configuring virtual machine credentials"
"Configuring Brocade HBA credentials"
on page 46.
"Configuring Brocade HBA credentials"
on page 46.
on page 45 or
on page 45 or
DCFM Enterprise User Manual
53-1001775-01