Finding Assigned Thresholds; Viewing Thresholds - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

13

Finding assigned thresholds

5. Change the number of port events allowed for the threshold from the Threshold errors list, if
6. Change the time period for the threshold from the violations per list, if necessary.
7.
8. Click OK on the Port Fencing dialog box.
Finding assigned thresholds
The Management application allows you to find all ports with a specific threshold applied.
NOTE
This search is performed on the threshold name. Since Fabric OS devices do not retain the threshold
name, the ability to search for a threshold on a Fabric OS device is not available in most cases.
To find assigned thresholds, complete the following steps.
1. Select Configure > Port Fencing.
2. Select a threshold type from the Violation Type list.
3. Select a threshold from the Threshold table.
4. Click Find.
5. Every port which uses the selected threshold is highlighted in the Ports table.
6. Click OK on the Port Fencing dialog box.

Viewing thresholds

1. Select Configure > Port Fencing.
2. Select a threshold type from the Violation Type list.
3. Review the Thresholds and Ports tables.
4. Repeat
5. Click OK on the Port Fencing dialog box.
348
necessary.
Click OK on the Edit Security Threshold dialog box.
If the threshold has already been assigned to ports, an "Are you sure you want to make the
requested changes to this threshold on "X" ports?" message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 339.
The Port Fencing dialog box displays.
The Port Fencing dialog box displays.
step 2 and step 3, as necessary.
"Assigning thresholds" on
DCFM Enterprise User Manual
53-1001775-01