Adding A Link Reset Threshold - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

13

Adding a Link Reset threshold

Adding a Link Reset threshold
NOTE
This threshold is only available for Fabric OS devices.
Use this threshold to block a port when a Link Reset violation meets the Fabric OS switch
threshold.
To add a Link Reset threshold, complete the following steps.
1. Select Configure > Port Fencing.
2. Select Link Reset (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of link resets allowed for the threshold in the Threshold errors field.
7.
334
The Port Fencing dialog box displays.
The Add Link Reset Threshold dialog box displays.
FIGURE 129 Add Link Reset Threshold dialog box
•
Default—Uses device defaults. Go to
•
Custom—Uses your selections. Continue with
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None—the port is blocked as soon as the specified number of link resets allowed is met.
•
Second—the port is blocked as soon as the specified number of link resets allowed is
reached within a second.
•
Minute—the port is blocked as soon as the specified number of link resets allowed is
reached within a minute.
•
Hour—the port is blocked as soon as the specified number of link resets allowed is
reached within a hour.
•
Day—the port is blocked as soon as the specified number of link resets allowed is reached
within a day.
step 8.
step 6.
DCFM Enterprise User Manual
53-1001775-01