Show Dos_Prevention - D-Link DGS-1100-16/ME Reference Manual

Example usage:
To configure DoS attack prevention on the switch:
DGS-1100-24P/ME:admin#config dos_prevention dos_type land_attack
state enable
Command : config dos_prevention dos_type land_attack state enable
Success.
DGS-1100-24P/ME:admin#

show dos_prevention

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure DoS attack prevention on the switch:
DGS-1100-24P/ME:admin#show dos_prevention
Command : show dos_prevention
DoS Type
-----------------------------------------
Land Attack
Blat Attack
TCP Null Scan
TCP Xmascan
TCP SYNFIN
TCP SYN SrcPort Less 1024 Disabled Drop
Ping Death Attack
DGS-1100-24P/ME:admin#
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
To show the DoS prevention information on the switch.
show dos_prevention {land_attack | blat_attack | tcp_null_scan
| tcp_xmascan | tcp_synfin | tcp_syn_srcport_less_1024 |
ping_death_attack }
This command displays the DoS prevention information on the
switch.
None.
None.
State Action
-------------- ---------
Enabled Drop
Disabled Drop
Disabled Drop
Disabled Drop
Disabled Drop
Disabled Drop
160