Show Dos_Prevention - D-Link DGS-1210/ME series Reference Manual

Restrictions
Example usage:
To configure a land attack and blat attack prevention:
DGS-1210-28P/ME:5# config dos_prevention dos_type blat_attack action
drop
Command: config dos_prevention dos_type blat_attack action drop
Success.
DGS-1210-28P/ME:5#

show dos_prevention

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DoS prevention information:
DGS-1210-28P/ME:5# show dos_prevention
Command: show dos_prevention
Trap/Log : Disabled
DosType
-------------------------------------- ---------- ---------------- --------------------
Land Attack
Blat Attack
Tcp Null Scan
Tcp Xmascan
Tcp Synfin
Tcp Syn Srcport less 1024 Enabled Drop
Ping Death Attack
Tcp Tiny Fragment
To display DoS prevention information for Land Attack:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
drop.
state [enable | disable]- Enable or disable DoS prevention.
Only administrator or operate-level users can issue this command.
Used to display DoS prevention information.
show dos_prevention { land_attack | blat_attack | smurf_attack |
tcp_null_scan | tcp_xmascan | tcp_synfin |
tcp_syn_srcport_less_1024 }
The show dos_prevention command is used to display DoS
prevention information, including the type of DoS attack, the
prevention state, the corresponding action if the prevention is
enabled, and the counter information of the DoS packet.
The type of DoS attack. Possible values are as follows:
land_attack, blat_attack, smurf_attack, tcp_null_scan, tcp_xmascan
tcp_synfin and tcp_syn_srcport_less_1024.
None.
State
Enabled Drop
Enabled
Disabled Drop
Disabled Drop
Enabled
Disabled Drop
Disabled Drop
Action Frame Counts
-
Drop -
-
-
Drop -
-
-
-
56