Ports To Vlan; User's Manual Of Wgsd-1022/Wgsd - Planet WGSD-1022 User Manual

8-port managed ethernet switch
Hide thumbs Also See for WGSD-1022:
Table of Contents

Advertisement

• Port
• Mode
• Acceptable Frame
Type
• PVID
• Ingress Filtering
• LAG
Port Mode
Access
General
Trunk

4.4.3 Ports to VLAN

The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port default VLAN ID (PVID) is configured on the
Create VLAN screen. All untagged packets arriving to the device are tagged by the ports PVID. The Ports to VLAN screen
contains a Port Table for VLAN parameters for each port. Ports are assigned VLAN membership by selecting and configuring
the presented configuration options, you can refer to figure 4-12.
Displays the port number included in the VLAN
Indicates the port mode. Possible values are:
• General - The port belongs to VLANs, and each VLAN is user-defined as
tagged or untagged (full 802.1Q mode).
• Access - The port belongs to a single untagged VLAN. When a port is in
Access mode, the packet types which are accepted on the port (packet type)
cannot be designated. It is also not possible to enable/ disable ingress filtering
on an access port.
• Trunk - The port belongs to VLANs in which all ports are tagged (except for an
optional single native VLAN).
Packet type accepted on the port. Possible values are:
• Admit Tag Only - indicates that only tagged packets are accepted on the port.
• Admit All - indicates that both tagged and untagged packets are accepted on
the port.
Assigns a VLAN ID to untagged packets. The possible values are 2 to 4094. VLAN
4095 is defined as per standard and industry practice as the discard VLAN. Packets
classified to the Discard VLAN are dropped
Enables or disables Ingress filtering on the port. Ingress filtering discards packets
which do not include an ingress port
Indicates the LAG to which the VLAN is defined
VLAN Membership
Belongs to a single untagged VLAN
Allowed to belongs to multiple untagged
VLANs at the same time
Allowed to belongs to multiple Tagged
VLANs at the same time

User's Manual of WGSD-1022/WGSD-8000

( Tag=PVID be removed)
(Tag=PVID be removed)
(Tag=PVID or Original VID be remained)
- 46 –
Frame Leave
Untagged
Untagged
Tagged

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgsd-8000

Table of Contents