Table of Contents
Advertisement
4.3 Port Configuration
Use the Port Configuration Menu to display or configure the Managed Switch's ports. This section has the following items:
Port Control
Port Status
Port Statistics
Port Sniffer
4.3.1 Port Control
In Port control you can configure the settings of each port to control the connection parameters, and the status of each port
is listed beneath.
The page includes the following fields:
Object
Port:
Description:
State:
Configures port connection settings
Display the current Port link status and speed etc.
Lists Ethernet and RMON port statistics
Sets the source and target ports for mirroring
Figure 4-3-1: Port Control Interface Screenshot
Description
Use the scroll bar and click on the port number to choose the port to be
configured.
User add per port description for indication, the available range is 16 letters.
Current port state. The port can be set to disable or enable mode. If the port state
is set as 'Disable', it will not receive or transmit any packet.
58
User's Manual of WGSW-2620HP
Advertisement
Table of Contents
