Table of Contents
Advertisement
4.4 CLI Management
The system supports the console management—CLI command. After you log in on to the system, you will see a command
prompt. To enter CLI management interface, type in "enable" command.
The following table lists the CLI commands and description.
4.5 Commands Level
Modes
Begin a session
User EXEC
with your switch.
Enter the enable
Privileged
command while in
EXEC
User EXEC mode.
CLI command interface
Access Method
Prompt
switch>
switch#
User's Manual of ISW-1022M
Exit Method
Enter logout or
quit.
Enter disable to
exit.
31
About This Mode1
The user commands available
at the user level are a subset of
those available at the
privileged level.
Use this mode to:
• Perform basic tests.
• Display system information.
The privileged command is the
advanced mode.
Use this mode to
Advertisement
Table of Contents
