Static Address - Planet WGSD-1022 User Manual

• User Name
• Password
• Confirm Password
Use the

4.12.2 Static Address

A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and
cannot be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the
address table (see figure 4-69)
The page contains the following fields:
• Interface
• Local, authenticates the user at the device level. The device
checks the user name and password for authentication.
• RADIUS, where authenticates the user at the RADIUS server.
• TACACS+, which authenticates the user at the TACACS+ server.
• None, assigns none authentication method to the authentication
profile.
Displays the user name.
Specifies the new password. The password is not displayed. As it
entered an "*" corresponding to each character is displayed in the
field. (Range: 1-159 characters)
This confirms the new password. The password entered into this field
must be exactly the same
as the password entered in the Password field.
button when you want to add the user configuration to the Local User's Table.
Figure 4-69 Static Address screen
Displays the interface to which the entry refers:
• Port, to which the specific port number the forwarding database
User's Manual of WGSD-1022/WGSD-8000
- 138 –