Dell Networking 7048 Reference Manual page 207

• SSH and the keying information to use for SSH.
• HTTP.
• HTTPS and the security certificate to be used.
• SNMPv1/v2c and the read and read/write community strings to be used.
• SNMPv3 and the security information for used this protocol.
For each of these management profiles, the user defines the list of hosts or
subnets from which the management profiles may be used.
Other CLI Tools and Capabilities
The CLI has several other capabilities associated with its primary functions.
Terminal Paging
The terminal width and length for CLI displays is 79 characters and 25 lines,
respectively. The length setting is used to control the number of lines the CLI
will display before it pauses. For example, the CLI pauses at 24 lines and
prompts the user with the
the user to press either <q> or any other key. If the user presses any key
except <q>, the CLI shows the next page. A <q> key stops the display and
returns to the CLI prompt.
Boot Message
The boot message is a system message that is not user-configurable and is
displayed when the system is booting. Displayed information includes the
following:
• Operational code date
• The board type
• The CPU
• Memory size
To start the normal booting process, select item 1 in the Boot Menu. The
following is a sample log for booting information.
Boot Menu 4.1.0.6
CPU Card ID: 0x508548
-more-
prompt on the 25th line. The CLI waits for
Using the CLI
207