Dell Networking 7048 Reference Manual page 159

SNMP
Command
show snmp
show snmp engineID
show snmp filters
show snmp group
show snmp user
show snmp views
show trapflags
snmp-server community
snmp-server community-
group
snmp-server contact
snmp-server enable traps
snmp-server engineID local
snmp-server filter
snmp-server group
snmp-server host
snmp-server location
snmp-server user
snmp-server view
snmp-server v3-host
a. For the meaning of each Mode abbreviation, see
Description
Displays the SNMP status.
Displays the SNMP engine ID.
Displays the configuration of filters.
Displays the configuration of groups.
Displays the configuration of users.
Displays the configuration of views.
Displays SNMP traps globally or displays
specific SNMP traps.
Sets up the community access string to permit
access to SNMP protocol.
Maps SNMP v1 and v2 security models to the
group name.
Sets up a system contact (sysContact) string.
Enables SNMP traps globally or enables specific
SNMP traps.
Specifies the Simple Network Management
Protocol (SNMP) engine ID on the local switch.
Creates or updates an SNMP server filter entry. GC
Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
Specifies the recipient of SNMP notifications.
the system location string.
Sets
Configures a new SNMP Version 3 user.
Creates or updates a Simple Network
Management Protocol (SNMP) server view
entry.
Specifies the recipient of Simple Network
Management Protocol Version 3 (SNMPv3)
notifications.
Mode Types on page 81.
Command Groups
a
Mode
PE
PE
PE
PE
PE
PE
PE
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
159