Dell Networking 7048 Reference Manual page 184

member ports as a single entity. The Global Configuration mode
command interface port-channel
the Port Channel mode.
Tunnel — Contains commands to manage tunnel interfaces. The Global
•
Configuration mode command
Configuration mode to configure an tunnel type interface.
• Loopback — Contains commands to manage loopback interfaces. The
Global Configuration mode command interface loopback enters the
Loopback Configuration mode to configure an loopback type interface.
• SSH Public Key-chain — Contains commands to manually specify other
switch SSH public keys. The Global Configuration mode command crypto
key pub-key chain ssh is used to enter the SSH Public Key-chain
configuration mode.
• SSH Public Key-string — Contains commands to manually specify the
SSH Public-key of a remote SSH Client. The SSH Public-Key Chain
Configuration mode command user-key command is used to enter the
SSH Public-Key Configuration mode.
• MAC Access-List — Configures conditions required to allow traffic based
on MAC addresses. The Global Configuration mode command mac-
access-list is used to enter the MAC Access-List configuration mode.
• TACACS — Configures the parameters for the TACACS server.
• Radius — Configures the parameters for the RADIUS server.
• SNMP Host Configuration — Configures the parameters for the SNMP
server host.
• Crypto Certificate Request — Configures the parameters for crypto
certificate request.
• Crypto Certificate Generation — Configures the parameters for crypto
certificate generate.
• Logging — Configures the parameters for syslog log server.
Identifying the Switch and Command Mode from the System Prompt
The system prompt provides the user with the name of the switch
(hostname) and identifies the command mode. The following is a formal
description of the system command prompt:
port-channel-number is used to enter
interface tunnel enters the Tunnel
Using the CLI
184