Dell PowerEdge M I/O Aggregator Reference Manual page 248

clear hardware stack-unit
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
246 | Debugging and Diagnostics
• show hardware stack-unit
• show hardware system-flow
Clear statistics from selected hardware components.
clear hardware stack-unit 0–5 { counters | unit 0–1 counters | cpu data-plane statistics | cpu
party-bus statistics | stack-port 0–52 }
stack-unit 0-5
counters
unit 0–0 counters
cpu data-plane statistics
cpu party-bus statistics
stack-port 33–56
none
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
show diag
stack-unit
Enter the keyword
member and then enter one of the following command options to clear a
specific collection of data.
counters
Enter the keyword
member.
unit
Enter the keyword along with a port-pipe number, from
counters
followed by the keyword
port-pipe.
cpu data-plane statistics
Enter the keywords
statistics.
cpu party-bus statistics
Enter the keywords
statistics.
stack-port
Enter the keyword
port to clear the statistics of the particular stacking port.
Range: 33 to 56
Note: You can identify stack port numbers by physical inspection of
the rear modules. The numbering is the same as for the 10G ports.
You can also inspect the output of the show system stack-ports
command.
Displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
followed by 0 to 5 to select a particular stack
to clear the counters on the selected stack
to clear the counters on the selected
to clear the data plane
to clear the management
followed by the port number of the stacking
0 1
to ,