Dell PowerEdge M I/O Aggregator Reference Manual page 209

username
Establish an authentication system based on user names.
Syntax
username name
[ encryption-type ] password ] [ privilege level ]
If you do not want a specific user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
name
access-class
access-list-name
nopassword
password
secret
encryption-type
password
privilege level
secret
Defaults
The default encryption type for the password option is 0. The default encryption type for the secret
option is 0.
Command Modes
CONFIGURATION
Command
Version 8.3.17.0
History
Usage To view the defined user names, use the
Information
Related
service
Commands
password-encryp
tion
show
running-config
[ access-class access-list-name ] [ nopassword | { password | secret }
Enter a text string for the name of the user up to 63 characters.
access-class
Enter the keyword
control list (either an IP access control list or MAC access control list).
nopassword
Enter the keyword
password.
password
Enter the keyword
secret
Enter the keyword
Enter an encryption type for the
• 0 directs FTOS to store the password as clear text. It is the default encryption
type when using the
• 7 to indicate that a password encrypted using a DES hashing algorithm will
follow. This encryption type is available with the
• 5 to indicate that a password encrypted using an MD5 hashing algorithm will
follow. This encryption type is available with the
default encryption type for this option.
Enter a string up to 32 characters long.
privilege
Enter the keyword
secret
Enter the keyword
Supported on M I/O Aggregator
show running-config
Specifies a password for users on terminal lines.
Views the current configuration.
followed by the name of a configured access
to specify that the user should not enter a
encryption-type
followed by the
encryption-type
followed by the
password
that you will enter.
password
option.
password
secret
followed by a number from zero (0) to 15.
followed by the encryption type.
user command.
or the password.
or the password.
option only.
option only, and is the
Security | 207