Dell PowerEdge M I/O Aggregator Reference Manual page 224

Dell poweredge ftos command line reference guide for the m i/o aggregator
Hide thumbs Also See for PowerEdge M I/O Aggregator:
Table of Contents

Advertisement

Command
History
Usage
Information
reset stack-unit
Syntax
Parameters
Default
Command Modes
Command
History
Usage
Information
Example
222
|
Stacking Commands
Version 8.3.17.0
Supported on M I/O Aggregator
This command is used to reset the stack-unit. The master unit can also be power cycled using this
command.
Reset any designated stack member except the management unit (master unit).
reset stack-unit 0-5 hard
0-5
Enter the stack member unit identifier of the stack member to reset.
hard
Reset the stack unit if the unit is in a problem state.
none
EXEC Privilege
Version 8.3.17.0
Supported on M I/O Aggregator
Resetting the management unit is not allowed (an error message is displayed if you try to do so).
Resetting is a soft reboot, including flushing the forwarding tables.
You can run this command directly on the stack standby unit (Standby Master) to reset the standby.
You cannot reset any other unit from the standby unit.
Figure 21-1. reset stack-unit Command Example on the Stack Standby Unit
FTOS#show system brief
Stack MAC : 00:1e:c9:f1:00:9b
--
Stack Info
--
Unit
UnitType
Status
---------------------------------------------------------------------------------
---
0
Management
online
1
Standby
online
2
Member
not present
3
Member
not present
4
Member
not present
5
Member
not present
FTOS#
FTOS#reset stack-unit 0
% Error: Reset of master unit is not allowed.
FTOS#
FTOS#reset stack-unit 1
FTOS#01:02:00: %STKUNIT0-M:CP %CHMGR-5-STACKUNIT_RESET: Stack unit 1 being reset
01:02:00: %STKUNIT0-M:CP %IFMGR-1-DEL_PORT: Removed port: Te 1/1-32,41-56
01:02:00: %STKUNIT0-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 1 down - reset
01:02:00: %STKUNIT1-S:CP %IFMGR-1-DEL_PORT: Removed port: Te 1/1-32,41-56
01:02:05: %I/O-Aggregator:0 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port
state to down: 0/37
01:02:11: %STKUNIT0-M:CP %POLLMGR-2-ALT_STACK_UNIT_STATE: Alternate Stack-unit is
not present
FTOS#01:02:12: %STKUNIT0-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 1 down - card
removed
ReqTyp
I/O-Aggregator
I/O-Aggregator
<<Resetting master not allowed
CurTyp
Version
I/O-Aggregator
8-3-17-46
I/O-Aggregator
8-3-17-46
Ports
56
56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge web serverPoweredge xl 5133-4

Table of Contents