Dell PowerEdge M I/O Aggregator Reference Manual page 38

Defaults
Command Modes
Command
History
Usage
Information
Example
upgrade system
Syntax
Parameters
36 | File Management
all
booted
ftp
tftp
flash
usbflash
A
B
none
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
You must reload FTOS after executing this command.
Figure 4-16. upgrade boot Command Example
FTOS#upgrade boot ?
all
bootflash-image
bootselector-image
FTOS#
Upgrade the bootflash image or system image.
upgrade system {flash: | ftp: | scp: | tftp: | usbflash: | stack-unit {0-5 | all} {A: | B:}
0-5 Enter this keyword to upgrade only the mentioned stack-unit
all Enter this keyword to upgrade all the member units of the stack
ftp After entering this keyword you can either follow it with the location of the source file in this
//userid:password@hostip/filepath
form:
scp After entering this keyword you can either follow it with the location of the source file in this
//userid:password@hostip/filepath
form:
tftp
After entering this keyword you can either follow it with the location of the source file in this
//hostlocation/filepath
form:
Enter this keyword to upgrade all the member stack-units
Enter this keyword to upgrade from the current image in the M I/O
Aggregator.
After entering this keyword you can either follow it with the location of the
//userid:password@hostip/filepath
source file in this form:
Enter to launch a prompt sequence.
After entering this keyword you can either follow it with the location of the
//hostlocation/filepath
source file in this form:
prompt sequence.
After entering this keyword you can either follow it with the location of the
//filepath
source file in this form:
sequence.
After entering this keyword you can either follow it with the location of the
//filepath
source file in this form:
sequence..
Enter this keyword to upgrade the bootflash partition A
Enter this keyword to upgrade the bootflash partition B
Upgrade both boot flash image and selector image
Upgrade boot flash image
Upgrade boot selector image
, or press Enter to launch a prompt sequence.
, or press Enter to launch a prompt sequence.
, or press Enter to launch a prompt sequence.
, or press Enter to launch a
, or press Enter to launch a prompt
, or press Enter to launch a prompt
, or press