Debugging and Diagnostics
This chapter contains three sections:
•
•
Offline Diagnostic Commands
The offline diagnostics test suite is useful for isolating faults and debugging hardware. While tests are
running, the Dell Force10 operating software (FTOS) results are saved as a text file
(TestReport-SU-X.txt) in the flash directory. The show file command is available only on Master and
Standby.
Important Points to Remember
•
•
•
•
•
The offline diagnostics commands are:
•
•
•
•
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
The hardware commands are:
•
•
•
Offline Diagnostic Commands
Hardware Commands
Offline diagnostics can only be run when the unit is offline.
Offline diagnostics cannot be run in Stacking mode.
You can only run offline diagnostics on a unit to which you are connected via the console. In other
words, you cannot run diagnostics on a unit to which you are connected via a stacking link.
Diagnostic results are stored in a file (TestReport-SU-X.txt) in the flash directory. To review the
results, use the show file command, which prints the results to the screen.
Diagnostics only test connectivity, not the entire data path.
diag stack-unit
offline stack-unit
online stack-unit
show diag
clear hardware stack-unit
hardware watchdog
show diag
25
Debugging and Diagnostics | 245