Dell PowerEdge M I/O Aggregator Reference Manual page 228

stack-unit iom-mode
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
Example
226 | Stacking Commands
Toggle the M I/O Aggregator operating mode from standalone to stack or vice-versa.
stack-unit <unit-number> iom-mode [ stack | standalone ]
unit number Number of the member stack unit. Valid values: 0 to 5. Default: 0.
<0-5>
stack
Enable stack mode.
standalone Enable stand-alone mode.
standalone
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
reload
show system
Figure 21-7. show system stack-unit stack-group Command Example
FTOS(conf)#stack-unit 0 iom-mode stack
% You are about to stack your IOA module, please reload the IOA
and then plug in the stacking cable for the changes to take effect.
FTOS(conf)#
FTOS#
Reboots FTOS.
Displays the current status of all stack members or a specific member.