Dell PowerEdge M I/O Aggregator Reference Manual page 30

pwd
Syntax
Command Modes
Command
History
Example
Related
Commands
rename
Syntax
Parameters
Command Modes
Command
History
restore factory-defaults
Syntax
Parameters
Command Modes
28 | File Management
Displays the current working directory.
pwd
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Figure 4-4. pwd Command Example
FTOS#pwd
flash:
FTOS#
cd Changes the working directory.
Rename a file in the local file system.
rename url url
url
Enter the following keywords and a filename:
• For a file on the internal Flash, enter
• For a file on the external Flash, enter
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Restore factory defaults.
restore factory-defaults stack-unit {0-5 | all} {clear-all | nvram}
factory-defaults Return the system to its factory default mode.
0-5 Enter this keyword to restore only the mentioned stack-unit.
all
Enter this keyword to restore all units in the stack.
clear-all
Enter this keyword to reset the NvRAM and the system startup configuration.
nvram
Enter this keyword to reset the NvRAM only.
EXEC Privilege
flash://
followed by the filename.
usbflash://
followed by the filename.