Dell PowerEdge M I/O Aggregator Reference Manual page 189

Parameters
stack-unit unit_number
port-set port-pipe
address mac-addr
dynamic
static
interface interface
vlan vlan-id
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.17.0
History
(REQUIRED) Enter the keyword
number to select the stack unit for which to gather information.
Range: 0 to 5
(REQUIRED) Enter the keyword
to select the Port-Pipe for which to gather information.
Range: 0
(OPTIONAL) Enter the keyword
the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
(OPTIONAL) Enter the keyword
addresses learned dynamically by the switch.
(OPTIONAL) Enter the keyword
specifically configured on the switch.
(OPTIONAL) Enter the keyword
slot and port information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
(OPTIONAL) Enter the keyword
the MAC address assigned to the VLAN.
Range: 1 to 4094.
Supported on M I/O Aggregator
stack-unit
followed by a stack member
port-set
followed by a Port-Pipe number
address
followed by a MAC address in
dynamic
to display only those MAC
static
to display only those MAC address
interface
followed by the interface type,
followed by the slot/port information.
vlan
followed by the VLAN ID to display
Layer 2 | 187