Dell PowerEdge M I/O Aggregator Reference Manual page 39

flash
usbflash
A
B
Defaults
none
Command Modes EXEC Privilege
Command
Version 8.3.17.0
History
Usage
You must reload FTOS after executing this command. Use the command
Information
copy FTOS from the management unit to one or more stack members.
Example Figure 4-17. upgrade system Command Example
After entering this keyword you can either follow it with the location of the source file in this
//filepath
form: , or press Enter to launch a prompt sequence.
After entering this keyword you can either follow it with the location of the source file in this
//filepath
form: , or press Enter to launch a prompt sequence..
Enter this keyword to upgrade the bootflash partition A
Enter this keyword to upgrade the bootflash partition B
Supported on M I/O Aggregator
FTOS#upgrade system ?
flash:
ftp:
/userid:password@hostip/filepath)
scp:
/userid:password@hostip/filepath)
stack-unit
tftp:
/hostip/filepath)
usbflash:
filepath)
FTOS#
Copy from flash file system (flash://filepath)
Copy from remote file system, IPv4 or IPv6, (ftp:/
Copy from remote file system, IPv4 or IPv6, (scp:/
Sync image to the stack-unit
Copy from remote file system, IPv4 or IPv6, (tftp:/
Copy from usbflash file system (usbflash://
upgrade system stack-unit
File Management | 37
to