Dell PowerEdge M I/O Aggregator Reference Manual page 112

Command
History
Usage
Information
renew dhcp interface
Syntax
Parameters
Command Mode
Default
Command
History
Usage
Information
show ip dhcp client statistics
Syntax
Parameters
Command Mode
Default
110 | Dynamic Host Configuration Protocol (DHCP)
Version 8.3.17.0 Supported on M I/O Aggregator
When you enter the release dhcp command, although the IP address that was dynamically-acquired
from a DHCP server is released from an interface, the ability to acquire a new DHCP server-assigned
address remains in the running configuration for the interface. To acquire a new IP address, enter either
the renew dhcp command at the EXEC privilege level or the ip address dhcp command at the
interface configuration level.
Re-acquire a dynamic IP address on an Ethernet interface enabled as a DHCP client.
renew dhcp interface type slot/port
interface type slot/ Enter any of the following keywords and slot/port or number to clear counters from
port a specified interface:
•
•
EXEC Privilege
None.
Version 8.3.17.0 Supported on M I/O Aggregator
The renew dhcp command is used to renew the lease of IP address obtained through dhcp.
To display the currently configure dynamic IP address and lease time, enter the show ip dhcp lease
command.
Displays DHCP client statistics, including the number of DHCP messages sent and received on an
interface.
show ip dhcp client statistics {all | interface type slot/port }
all Display DHCP client statistics on all DHCP client-enabled interfaces on the switch.
interface type slot/ Display DHCP client statistics on the specified interface.
port
•
•
EXEC Privilege
None.
For the management interface on the stack-unit, enter the keyword
managementethernet
followed by slot/port information. The slot and port
range is 0.
For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
For the management interface on the stack-unit, enter the keyword
managementethernet
followed by slot/port information. The slot and port
range is 0.
For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.