Dell PowerEdge M I/O Aggregator Reference Manual page 168

Parameters
Command Modes
Command
History
Example
166 | IPv4 Routing
interface interface
ip ip-address mask
macaddress
mac-address mask
static
dynamic
summary
retries
inspection
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Figure 12-4. show arp Command Example (Partial)
FTOS>show arp
Protocol Address
---------------------------------------------------------------------------------
--------
Internet 10.11.8.6
Internet 10.11.68.14
Internet 10.11.209.254
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For the Management interface, enter the keyword
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN, enter the keyword
(OPTIONAL) Enter the keyword
decimal format. Enter the optional IP address mask in the slash prefix format (/
x).
(OPTIONAL) Enter the keyword
nn:nn:nn:nn:nn:nn format. Enter the optional MAC address mask in
nn:nn:nn:nn:nn format also.
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword summary to view the number of ARP retries
before a 20 sec back off.
(OPTIONAL) Enter the keyword
details.
Age(min) Hardware Address Interface
167 00:01:e9:45:00:03
124 00:01:e9:45:00:03
0 00:01:e9:45:00:03
managementethernet
vlan
followed by a number from 1 to 4094.
ip
followed by an IP address in the dotted
macaddress
followed by a MAC address in
static
to view entries entered manually.
dynamic
to view dynamic entries.
summary
to view a summary of ARP entries.
inspection
to view dynamic ARP Inspection
VLAN CPU
Ma 0/0 -
Ma 0/0 -
Ma 0/0 -
CP
CP
CP