Show Ip Route - Dell PowerEdge M I/O Aggregator Reference Manual

Figure 12-10. show ip interface brief Command Example (Partial)
FTOS#show ip int brief
Interface
TenGigabitEthernet 0/1
TenGigabitEthernet 0/2
TenGigabitEthernet 0/3
TenGigabitEthernet 0/4
TenGigabitEthernet 0/5
TenGigabitEthernet 0/6
TenGigabitEthernet 0/7
TenGigabitEthernet 0/8
TenGigabitEthernet 0/9
Table 12-6. show ip interface brief Column Headings
Field
Interface
IP-Address
Ok?
Method
Status
Protocol

show ip route

View information, including how they were learned, about the IP routes on the switch.
Syntax show ip route [ hostname | ip-address [ mask ] [ longer-prefixes ] | list prefix-list [ process-id ] |
connected | static | summary ]
Parameter
ip-address
mask
longer-prefixes
list prefix-list
process-id
connected
static
summary
IP-Address
unassigned
unassigned
unassigned
unassigned
unassigned
unassigned
unassigned
unassigned
unassigned
Description
Displays type of interface and the associated slot and port number.
Displays the IP address for the interface, if configured.
Indicates if the hardware is functioning properly.
Manual
Displays if the configuration is read from the saved configuration.
States whether the interface is enabled (
down
).
States whether IP is enabled (
(OPTIONAL) Specify a name of a device or the IP address of the device to view
more detailed information about the route.
(OPTIONAL) Specify the network mask of the route. Use this parameter with
the IP address parameter.
(OPTIONAL) Enter the keyword
common prefix.
(OPTIONAL) Enter the keyword
(OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
(OPTIONAL) Enter the keyword
connected routes.
(OPTIONAL) Enter the keyword
route command.
(OPTIONAL) Enter the keyword
OK? Method Status
NO None up
YES None up
YES None up
NO None up
NO None up
NO None up
NO None up
NO None up
NO None up
up administratively
) or disabled (
up down
) or disabled ( ) on the interface.
longer-prefixes
list
and the name of a configured prefix list.
connected
to view only the directly
static
to view only routes configured by the
summary.
See
Protocol
down
up
up
down
down
down
down
down
down
to view all routes with a
ip
show ip route summary.
IPv4 Routing | 171