Dell PowerEdge M I/O Aggregator Reference Manual page 111

Parameters
interface type slot/
port
Command Mode EXEC Privilege
Default
None
Command
Version 8.3.17.0
History
debug ip dhcp clients packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax debug ip dhcp client packets [interface type slot/port]
Parameters
interface type slot/
port
Command Mode
EXEC Privilege
Default None
Command
Version 8.3.17.0
History
release dhcp interface
Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client
configuration on the interface.
Syntax release dhcp interface type slot/port
Parameters
interface type slot/
port
Command Mode
EXEC Privilege
Default None.
Display log messages for DHCP packets sent and received on the specified
interface.
• For the management interface on the stack-unit, enter the keyword
managementethernet
range is 0.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Supported on M I/O Aggregator
Display log messages for DHCP packets sent and received on the specified
interface.
• For the management interface on the stack-unit, enter the keyword
managementethernet
range is 0.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Supported on M I/O Aggregator
• For the management interface on the stack-unit, enter the keyword
managementethernet
range is 0.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
followed by slot/port information. The slot and port
followed by slot/port information. The slot and port
followed by slot/port information. The slot and port
Dynamic Host Configuration Protocol (DHCP) | 109