Dell PowerEdge M I/O Aggregator Reference Manual page 259

Example 11 Figure 25-15. show hardware stack-unit per port buffer (a Specific Port) Command
Example
FTOS(conf)#show hardware stack-unit 0 buffer unit 0 port 1 buffer-info
-----
Maximum Shared Limit for the Port: 30720
Default Packet Buffer allocate for the Port: 120
Used Packet Buffer for the Port: 0
Example 12 Figure 25-16. show hardware stack-unit queue buffer Command Example
FTOS(conf)#show hardware stack-unit 0 buffer unit 0 port 1 queue 2 buffer-info
-----
Related
show interfaces port-channel
Commands
show processes cpu
show system stack-ports
show system
show hardware system-flow
Displays Layer 2 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax show hardware system-flow layer2 stack-unit 0-5 port-set 0-0 [ counters ]
Parameters
acl
stack-unit 0-5
port-set 0-0
[ counters ]
Defaults
none
Command Modes
EXEC Privilege
Command
Version 8.3.17.0
History
Buffer Stats for Unit 0 Port 1 -----
Buffer Stats for Unit 0 Port 1 Queue 2 -----
Maximum Shared Limit: 30720
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
qos For the selected stack member and stack member port-pipe, display which
|
system flow entry the packet hits and what queue the packet takes as it dumps
the raw system flow tables.
Enter the keyword
Enter the keyword
(OPTIONAL) Enter the keyword
ACL or QoS option.
Supported on M I/O Aggregator
Displays information on all interfaces on a specific stack member.
Displays CPU usage information based on running processes.
Displays information about the stacking ports on all switches in the stack.
Displays the current status of all stack members or a specific member.
stack-unit followed by
port-set
with a port-pipe number — 0.
counters
0 to 5 to select a stack member ID.
to display hit counters for the selected
Debugging and Diagnostics | 257