Boot System Gateway - Dell PowerEdge M I/O Aggregator Reference Manual

boot system gateway

Syntax
Parameters
Command Modes
Command
History
Usage
Information
boot system stack-unit
Syntax
Parameters
Command Modes
Command
History
Usage
Information
cd
Syntax
Parameters
Command Modes
22 | File Management
Specify the IP address of the default next-hop gateway for the management subnet.
boot system gateway ip-address
ip-address
Enter an IP address in dotted decimal format.
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
Saving the address to the startup configuration file preserves the address in NVRAM in case the startup
configuration file is deleted.
Specify the location of the FTOS image to be used to boot the system.
boot system stack-unit <0-5 | all> {default | primary | secondary}
0-5
Enter the stack member unit identifier of the stack member.
all Enter this keyword to set the primary, secondary, and default images for the
system.
default Enter this keyword to set the default image path for the system.
primary Enter this keyword to set the primary image path for the system.
secondary Enter this keyword to set the secondary image path for the system.
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
The system first attempts to load the image from the primary path. If it fails to boot, the system will try
to load the image from the secondary path and if that too fails, the system will load the default image.
Change to a different working directory.
cd directory
directory
(OPTONAL) Enter one of the following:
flash :
•
• usbflash :
EXEC Privilege
(internal Flash) or any sub-directory
(external Flash) or any sub-directory