Dell PowerEdge M I/O Aggregator Reference Manual page 53
Dell poweredge ftos command line reference guide for the m i/o aggregator
Hide thumbs
Also See for PowerEdge M I/O Aggregator:
- Getting started manual (38 pages) ,
- Command reference manual (290 pages)
Table of Contents
Advertisement
Example
Figure 5-5. show command-history Command Example
FTOS#show command-history
[7/19 10:37:51]: CMD-(CLI):[enable]by default from console
[7/19 10:37:54]: CMD-(CLI):[show running-config snmp]by default from console
[7/19 14:44:39]: CMD-(CLI):[enable]by default from console
[7/19 14:44:40]: CMD-(CLI):[configure terminal]by default from console
[7/19 14:44:41]: CMD-(CLI):[snmp-server community public ro]by default from
console
[7/19 14:44:41]: CMD-(CLI):[logging 172.16.1.162]by default from console
[7/19 14:44:41]: CMD-(CLI):[logging 10.10.10.4]by default from console
[7/19 14:44:41]: CMD-(CLI):[logging 10.1.2.4]by default from console
[7/19 14:44:42]: CMD-(CLI):[logging 172.31.1.4]by default from console
[7/19 14:44:42]: CMD-(CLI):[logging 133.33.33.4]by default from console
[7/19 14:44:42]: CMD-(CLI):[management route 172.16.1.0 /24 10.11.209.4]by default
from console
[7/19 14:44:43]: CMD-(CLI):[service timestamps log datetime]by default from
console
[7/19 14:44:43]: CMD-(CLI):[line console 0]by default from console
[7/19 14:44:43]: CMD-(CLI):[exec-timeout 0]by default from console
[7/19 14:44:44]: CMD-(CLI):[exit]by default from console
[7/19 14:45:35]: CMD-(CLI):[configure]by default from console
[7/19 14:45:43]: CMD-(CLI):[protocol lldp]by default from console
[7/19 14:54:19]: CMD-(CLI):[exit]by default from console
[7/19 14:54:29]: CMD-(CLI):[show version]by default from console
[7/19 14:54:36]: CMD-(CLI):[configure]by default from console
[7/19 14:54:42]: CMD-(CLI):[protocol lldp]by default from console
[7/19 14:55:24]: CMD-(CLI):[exit]by default from console
[7/19 15:1:57]: CMD-(CLI):[interface tengigabitethernet 1/1]by default from
console
[7/19 15:4:7]: CMD-(CLI):[exit]by default from console
[7/19 15:8:12]: CMD-(CLI):[interface vlan 2]by default from console
[7/19 15:8:28]: CMD-(CLI):[interface managementethernet 0/0]by default from
console
--More--
FTOS#
Related
clear command history
Commands
show configuration lock
Displays the configuration lock status.
Syntax
show configuration lock
Defaults
None
Command Modes
EXEC Privilege
Command
Version 8.3.17.0
History
- Repeated 1 time.
- Repeated 1 time.
- Repeated 1 time.
command history log.
Clears the
Supported on M I/O Aggregator
Control and Monitoring | 51
Advertisement
Table of Contents
