Clock Timezone - Dell PowerEdge M I/O Aggregator Reference Manual

Related
calendar set
Commands
clock summer-time date
show clock

clock timezone

Configure a timezone for the switch.
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name
offset
Default
Not configured.
Command Modes
CONFIGURATION
Command
Version 8.3.17.0
History
Usage Coordinated universal time (UTC) is the time standard based on the International Atomic Time
Information
standard, commonly known as Greenwich Mean time. When determining system time, you must
include the differentiator between UTC and your local timezone. For example, San Jose, CA is the
Pacific Timezone with a UTC offset of -8.
clock update-calendar
Set the switch hardware clock based on the software clock.
Syntax
clock update-calendar
Defaults Not configured.
Command Modes
EXEC Privilege
Command
Version 8.3.17.0
History
Usage
Use this command only if you are sure that the hardware clock is inaccurate and the software clock is
Information
correct.
You cannot delete this command (that is, there is not a "no" form of this command).
Sets the hardware clock.
Sets a date (and time zone) on which to convert the switch to daylight saving
time on a one-time basis.
Displays the current clock settings.
Enter the name of the timezone. You cannot use spaces.
Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to UTC for the
timezone.
• a minus sign (-) followed by a number from 1 to 23 as the number of hours
Supported on M I/O Aggregator
Supported on M I/O Aggregator
System Time | 235